REDX / Products / Transmission filters
Transmission filters
A transmission filter protects the gearbox, the clutches and the control valves from solid particles in the oil.
Application and location
In the transmission oil circuit
In a powered transmission the oil lubricates the gears and moves the clutches through the control valves. The filter sits in this circuit, on the pressure line or on the return line, depending on the machine.
It is a particle filter. Water in the oil is a different problem and is not solved by the filter.
Types in the range
- Transmission oil filters
Exact products and part numbers are confirmed when we identify your machine.
Cross-section
Clean oil for gears and controls
Select a part to follow the oil from the sump, through the pump and the filter, to the valves and clutches.
- Oil with particles
- Filtered oil
- Wear particles
Gearbox and sump
Gears, clutches and bearings wear slowly and release fine metal and friction particles into the oil. The oil collects in the sump, where it is drawn off for the circuit.
Where: At the bottom of the gearbox.
In service: Particles that stay in the oil keep circulating and can wear the surfaces they pass.
Pump and pick-up
The pump draws oil from the sump and sends it around the circuit. A coarse screen at the pick-up, where fitted, protects the pump from large debris. It is not a substitute for the fine filter further on.
Where: Low in the gearbox or on its side, with a line to the filter.
In service: A restricted pick-up starves the pump, so the screen is part of an inspection.
Particle filter
The oil flows from the outside through the pleated medium to the centre, and solid particles stop on the medium. The filter holds back solid particles only. It is not a water separator and should not be expected to remove water from the oil.
Where: On the pressure line before the valves and clutches, or on the return line, depending on the machine.
In service: As the medium loads, restriction rises. Follow the machine documentation for when to replace the filter.
Valves and clutches (controls)
The valves and clutches that shift the transmission have very small clearances. Clean oil keeps them moving freely. This is why the particle filter sits in front of them.
Where: On the transmission or the control block of the machine.
In service: Dirt in the controls can make shifting slow or uneven.
How the flow works
Why the filter sits before the controls
Wear in the sump
Gears, clutches and bearings release fine metal and friction particles into the oil over time.
The particle filter
The oil flows from the outside through the pleated medium. Solid particles stop on the medium.
Clean oil for the controls
The valves and clutches have very small clearances, so clean oil keeps them moving freely.
Choosing
What matters when choosing
- Whether the transmission has a spin-on filter, a cartridge or a filter in the sump.
- The position on the pressure or the return line.
- Whether the transmission shares oil with the hydraulics.
- The fluid and the machine variant, and the part number of the filter that is fitted now.
Service
Practical service notes
- Change the filter as the machine documentation says.
- Look at the oil as well: water or metal in the oil is a reason to find the cause.
- Clean around the filter head before opening it.
- Do not expect a particle filter to remove water.
Find filters for your machine
Tell us about the machine
To suggest the right filters we first need to identify the machine and the filters it has now. Send us as much of the list as you can.
What helps us choose
- Machine manufacturer and model
- Serial number or PIN
- Engine variant (see the engine plate)
- Part numbers of the filters currently fitted
- A photo of the machine plate and of the old filter
The button opens an e-mail with these headings ready to fill in. A model name alone is not enough to confirm a match, because the same model can come with different configurations.