Air filters
The air cleaner is the first line of defence for the engine: it decides how much dust is drawn into the cylinders.
Application and location
On the intake, before the engine
An air cleaner sits on the intake side of the engine, between the air inlet and the turbocharger or intake manifold. On machines that work in dust it often has a pre-cleaner or a dust ejector in front of the main element.
Because every cubic metre of air that the engine breathes passes through it, a damaged element or a poor seal matters more than the medium alone.
Types in the range
- Main (outer) air elements
- Safety (inner) air elements, for housings that carry one
Exact products and part numbers are confirmed when we identify your machine.
Cross-section
Air in, dust out
Follow the air through the housing and the pleated element. Select a part, or switch to the scenario that shows what the safety element is for.
- Dusty air (dirty side)
- Clean air (clean side)
- Dust
- Flow
Follow the air: it enters dusty on the outside of the main element, passes through the pleated medium and leaves clean on the inside. The dust does not follow it.
Dust is stopped on the outer face of the pleats and builds up there. The air passes through a thicker layer over time, so the resistance rises and the element has to be serviced. The dust stays on the dirty side.
If the main element is missing or damaged, dust can get past it. In an air cleaner with a safety element, the dust is stopped there instead of reaching the engine. It is a protection for that situation, not a substitute for changing the main element on time.
Inlet and housing
Dusty air enters the housing through the inlet and flows around the outside of the main element. This is the dirty side. Some machines add a pre-cleaner or a dust ejector here; they are options and are not part of every air cleaner. The cover can be opened so that the element can be changed.
Where: On the intake side of the engine.
In service: A cracked housing or a cover that is not closed correctly lets unfiltered air in, so closing it correctly is part of the job.
Pleated medium
The medium is folded into pleats so that a large surface fits in a small element. Dust stops on the outer face of the pleats while the air passes through the medium to the inside. A perforated core and end caps keep the pleats in shape and a gap between the pleats lets the air reach the whole surface.
Where: Between the dirty side and the clean side.
In service: As dust collects on the medium, the resistance to the airflow rises. That is the normal reason to service the element.
Seal
A gasket or rubber end cap presses the element against the housing so that dusty air cannot slip past the medium. Filtration only works when the dirty side and the clean side are separated, so the fit of the element and its seal are as important as the medium.
Where: At the open end of the element, against the housing wall.
In service: A damaged seal or an element that sits crooked is a leak path, even if the medium itself is intact.
Safety element (example configuration)
Some air cleaners have a second, inner element behind the main one. It is not meant as a second fine-filtering stage for everyday use. It protects the engine intake while the main element is removed for service and if the main element is damaged. Many air cleaners do not have one.
Where: Inside the main element, next to the outlet.
In service: It is no reason to delay changing the main element or to run on a damaged one.
Outlet to the engine
Air that has passed the medium leaves through the outlet and goes on to the engine intake. This is the clean side. The connection to the engine has to be sealed as well, because a leak downstream of the element lets dust in just as a leak at the seal does.
Where: Downstream of the element, towards the engine.
In service: Hoses, clamps and connections on the clean side are part of the filtration system.
How the flow works
Four steps from the inlet to the engine
Dusty air enters
Air flows into the housing and around the outside of the main element. This is the dirty side. A pre-cleaner or dust ejector, where fitted, removes larger grains first.
Dust stays on the medium
The air passes through the pleated medium. Dust stays on the outer face of the pleats and the filtered air continues to the inside of the element.
Clean air to the engine
The air leaves through the outlet. A safety element, where fitted, protects the intake while the main element is removed and if it is damaged; it is not a second cleaning stage.
Choosing
What matters when choosing
- The housing type: one element or two, and whether a pre-cleaner or dust ejector is fitted.
- The shape of the element and its end caps, so that the seal fits the housing.
- The engine and air cleaner variant — the same machine can be built with different housings.
- The conditions: dust, chaff, humidity and how long the machine works each day.
- The part number of the element that is fitted now.
Service
Practical service notes
- Inspect the element for damaged pleats and seal faces when it is removed.
- Clean the housing and the sealing surface without letting dust fall onto the clean side.
- Seal fit matters as much as the medium: dust that bypasses the element is not filtered.
- Do not clean or reuse an element in a way the machine maker does not allow.
Find filters for your machine
Tell us about the machine
To suggest the right filters we first need to identify the machine and the filters it has now. Send us as much of the list as you can.
What helps us choose
- Machine manufacturer and model
- Serial number or PIN
- Engine variant (see the engine plate)
- Part numbers of the filters currently fitted
- A photo of the machine plate and of the old filter
The button opens an e-mail with these headings ready to fill in. A model name alone is not enough to confirm a match, because the same model can come with different configurations.