Skip to content

REDX / Products / Crankcase ventilation filters

Crankcase ventilation filters

Crankcase gases carry a fine oil mist. A crankcase ventilation filter separates the oil so that it can drain back and only cleaned gas leaves.

Application and location

On the engine, at the crankcase or valve cover

A small part of the combustion gas passes the piston rings and enters the crankcase. The gas has to leave, and it must not take the oil mist with it. A crankcase ventilation (CCV) filter does this job between the crankcase and the outlet.

It is not the same product as a hydraulic reservoir breather. A breather filters the air that enters a tank; a CCV filter treats gas that comes from the engine.

Types in the range

  • Crankcase ventilation filters (CCV)

Exact products and part numbers are confirmed when we identify your machine.

Cross-section

Gas out, oil back

Select a part to see how the oil mist stops on the medium, joins into drops and runs back to the crankcase.

  • Gas with oil mist
  • Oil
  • Cleaned gas
  • Flow

Example configuration — where the cleaned gas goes and whether the separator is fitted to the engine or built into the valve cover differs between engines.

Crankcase and blow-by gas

A small part of the combustion gas passes the piston rings and enters the crankcase. It picks up a fine mist of engine oil on the way. This gas has to leave the crankcase, otherwise pressure builds up, and it must not carry the oil away with it.

Where: On the engine, at the crankcase or valve cover.

In service: The more the engine has worn, the more gas passes the rings, so the separator works harder over its service life.

Separating medium

The gas flows through a fibrous or pleated medium. Oil droplets are too heavy to follow the gas through the fibres: they stop on the medium, join into larger drops and run down. The construction differs between products, and so does what is replaced at service.

Where: In the housing between the crankcase and the outlet.

In service: A clogged medium restricts the gas flow. Follow the engine maker's service information for when to check or replace it.

Oil drain back

The separated oil collects at the bottom of the housing and runs back to the crankcase through a drain. Some designs use a drain valve so the oil can leave but gas cannot enter the drain from the wrong side. Not every separator has a drain; some designs return the oil inside the housing.

Where: At the lowest point of the separator, with a line to the crankcase or oil pan.

In service: A blocked drain keeps oil in the housing, so check that it is open when the element is changed.

Cleaned gas outlet

The cleaned gas leaves through the outlet. Depending on the engine it is led back to the air intake (closed system) or released outside (open system). This crankcase gas is not the same as the air that a hydraulic reservoir breather exchanges: a breather filters air entering the tank and has no oil mist to separate.

Where: On the separator housing, with a hose to the intake or to the outside.

In service: A restricted outlet raises crankcase pressure, so hoses and connections are part of the check.

Illustration of the operating principle — not a specific REDX product drawing.

How the flow works

Separate, drain, release

Gas with oil mist

The blow-by gas flows from the crankcase to the separator, carrying a fine mist of oil.

Separating medium

Oil droplets stop on the medium, join into larger drops and run down. The gas flows on through the medium.

Drain and outlet

The oil returns to the crankcase through a drain. The cleaned gas leaves through the outlet, back to the intake in a closed system or to the outside in an open one.

Choosing

What matters when choosing

  • Closed or open crankcase ventilation.
  • Whether the element is replaceable or the whole unit is.
  • The hose connections and the position on the engine.
  • The engine variant and the part number of the filter that is fitted now.

Service

Practical service notes

  • Check that the drain is open when the element is changed.
  • A restricted outlet raises the pressure in the crankcase, so hoses are part of the check.
  • Heavy blow-by can point to engine wear. A new filter does not cure that.
  • Follow the engine documentation for when to check or replace the element.

Find filters for your machine

Tell us about the machine

To suggest the right filters we first need to identify the machine and the filters it has now. Send us as much of the list as you can.

What helps us choose

  • Machine manufacturer and model
  • Serial number or PIN
  • Engine variant (see the engine plate)
  • Part numbers of the filters currently fitted
  • A photo of the machine plate and of the old filter

The button opens an e-mail with these headings ready to fill in. A model name alone is not enough to confirm a match, because the same model can come with different configurations.