Skip to content

REDX / Products / Fuel filters

Fuel filters

Fuel carries sediment, fine particles and free water. Fuel filters keep them away from the pump and the injection system, and separating water is a different job from filtering particles.

Application and location

Between the tank and the injection system

Fuel passes the filters on the way from the tank to the engine. Typically there is a pre-filter with a water separator on the supply side and a fine filter in front of the injection system. Some machines combine both functions in one housing, and some add a sedimenter as a separate element.

Not every machine has three separate devices. The functions matter more than the number of housings.

Types in the range

  • Fuel pre-filters with water separation
  • Fine fuel filters
  • Sedimenters, where the machine has a separate one

Exact products and part numbers are confirmed when we identify your machine.

Fuel path

From the tank to the injectors

Step through the path of the fuel. Watch how fine water droplets join into larger drops before they fall into the bowl, while solid particles settle on the medium.

  • Fuel with particles and water
  • Filtered fuel
  • Solid particle
  • Water droplet
  • Flow direction
  • Fuel tank
  • Sediment bowl (if fitted)
  • Pre-filter + water separator
  • Water bowl — Drain (if fitted) — Water sensor (if fitted)
  • Fine filter
  • Feed pump
  • Injection system — to the engine

Example configuration — functions may be combined in one housing.

From the tank

Fuel leaves the tank carrying what it picked up on the way: a fine suspension of solid particles and tiny droplets of water. The heaviest contamination settles at the bottom of the tank, but whatever stays suspended follows the fuel into the supply line.

Sediment bowl (if fitted)

Where a machine has a separate sediment bowl, the fuel slows down inside it. Heavy particles and large drops of water sink to the bottom and stay there, so less reaches the filters. Fine particles and tiny droplets stay in the fuel and travel on. Many machines do not have this element.

Pre-filter and water separator

Inside the pre-filter the fuel passes through the pleated medium from the outside in. Solid particles are caught on the surface of the medium. Water behaves differently: tiny droplets meet on the medium and merge into larger drops (coalescence). Once a drop is heavy enough it runs down and falls into the water bowl below.

Water bowl, drain and sensor

Separated water collects in the bowl because it is heavier than fuel. Only housings designed for it have a drain to let the water out and a water sensor to signal when the bowl needs emptying. Not every pre-filter has either of them.

Fine filter

The fine filter is the last barrier before the injection system. It holds back the fine particles that the pre-filter stage may let through. That is why the two parts do different jobs: the separator deals with free water, the fine filter protects the injection components from solid particles.

Illustration of the operating principle — not a specific REDX product drawing.

How the flow works

Three jobs on the way

Sediment and large drops

Heavy particles and large drops of water settle in a sedimenter, if the machine has one, or in the bowl of the pre-filter.

Water separation

In the separator, fine droplets first join into larger ones (coalescence). Heavy drops then fall into the collecting bowl. Solid particles are held by the medium.

Fine filtration

The fine filter holds back fine particles in front of the pump and the injectors. It does not do the work of the water separator.

Choosing

What matters when choosing

  • Whether the machine has a collecting bowl, a drain and a water sensor, and how they are connected.
  • The connection and thread, or the cartridge and housing, so the new filter fits the old head.
  • The position: supply side or in front of the injection system.
  • The engine and fuel system variant, since machines with the same model can differ.
  • The part number of the filter that is fitted now.

Service

Practical service notes

  • Drain the bowl as the machine documentation describes, where a drain is fitted.
  • Take a water sensor warning seriously and find where the water enters.
  • After a change, follow the machine procedure for priming and bleeding the system.
  • Keep fuel storage clean: condensation in a tank that is partly empty is a common source of water.

Find filters for your machine

Tell us about the machine

To suggest the right filters we first need to identify the machine and the filters it has now. Send us as much of the list as you can.

What helps us choose

  • Machine manufacturer and model
  • Serial number or PIN
  • Engine variant (see the engine plate)
  • Part numbers of the filters currently fitted
  • A photo of the machine plate and of the old filter

The button opens an e-mail with these headings ready to fill in. A model name alone is not enough to confirm a match, because the same model can come with different configurations.